Working Model of Valve Timing Manufacturer,Supplier and Exporter in China
Product Code : EL-AELE-11632
Description:
• A working model of valve timing is a device that shows how the valves in an engine open and close at the correct times to allow air, fuel, and exhaust gases to flow into and out of the cylinders.
• The model typically consists of a crankshaft, a camshaft, a set of valves, and a set of springs.
• The crankshaft is the main shaft of the engine and it rotates as the engine runs.
• The camshaft is connected to the crankshaft by a timing belt or chain.
• The camshaft has a series of lobes on it that operate the valves.
• The valves are spring-loaded and they normally stay closed.
• When a lobe on the camshaft comes into contact with a valve, it pushes the valve open.
• When the lobe passes, the spring forces the valve closed.
• The working model of valve timing shows how the crankshaft and camshaft are synchronized to open and close the valves at the correct times.
• The model can be used to demonstrate how different valve timing profiles can affect the performance of an engine.